The LP28013H is a complete constant-current/ constant voltage linear charger for single cell lithium-ion battery. Its DFN-10 package and low external component count make the LP28013H ideally suited for portable applications. The charge current and termination current could program by external resistors. While the battery voltage is lower than 2.6V, the charge current is typically 10% of the programmed charge current. During the constant voltage phases, if the charge current reduces to the termination current level, the device will disable the internal power MOS and CHRG goes high impedance, which signals the charge cycle is termination. When the input supply is removed, the LP28013H automatically enters a low current state, dropping the battery drain current to less than <1µA. Other features include charge current monitor, under voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.

 

 

 Portable Media Players/Game
 Power Bank
 Bluetooth Applications
 PDA/MID

 Input voltage up to 36V
 Input Over Voltage Protection：6.3V
 Short-circuit protection
 Programmable Charge Current up to 1A
 <1µA Battery Reverse Current
 Protection of Reverse Connection of Battery
 No MOSFET, Sense Resistor or Blocking Diode Required
 Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
 DFN-10 Package
 RoHS Compliant and 100% Lead (Pb)-Free

 

Please see specification. 

Please ask our service mailbox for what you want which is marketing@lowpowersemi.com.
We will send a copy to you as fast as we can.